---

How to Measure for Your Door Contact us: (800) 986-3667 email us

---

Measure existing door width and height in feet and inches. This determines the size of door needed. 
The rough opening should be the same size as the door.

Width: ________________ Height:_________________

Measure for sideroom: 3-3/4" is required on each side for installation of the vertical track for torsion springs.

Sideroom: _____________________________________

Measure area labeled "headroom"-distance between the top of the door opening ("jamb header") and the ceiling (or floor joist). 10" is required for standard installation of TORQUEMASTER SpringTM, 12" on standard torsion springs . If you have restricted headroom, special hardware is available. Low headroom hardware is available to reduce requirement to as low as 4-1/2" Note: If door height extends above the opening, the headroom measurement should be adjusted accordingly.

Existing headroom: _____________________________

Headroom needed: ______________________________

Measure area labeled "backroom"-distance is measured from the garage door opening toward the back wall of the garage.

Backroom: _____________________________________

Common garage door sizes include: 8' wide x 7' high, 9' wide x 7' high and 16' wide x 7' high .

Contact us for more questions and estimates.

---